top of page

How to Quote Window Cleaning Jobs: Stop Guessing, Start Calculating - Part 1/2

Nov 4
4 min read

When you're starting out in window cleaning, one of the hardest things to learn is how much to charge. The biggest mistake? Guessing.


I learnt this lesson early in my career when I quoted a restaurant $170 to clean all its glass. The job ended up taking me 11 hours. That's about $15.45 per hour, before expenses. It was an expensive lesson, but a valuable one.


A few years later, the customer contacted me again, expecting the same price. When I quoted what the job should have cost, I never heard from them again. It taught me another lesson:


an unrealistic price can create expectations that are difficult to change later.

Everyone makes mistakes when learning to quote. The trick is to develop a system, so you don't keep making the same ones.


1. How to Quote Window Cleaning Jobs Without Guessing

Two window-cleaning jobs can look almost identical but take very different amounts of time to complete. Hidden difficulties, awkward access, dirty glass or complicated layouts can turn a seemingly straightforward job into a long, unhappy day. That's why you need a consistent quoting framework.


A systematic approach helps you:

  • Produce more consistent pricing.

  • Explain why different jobs cost different amounts.

  • Compare new jobs with work you've already completed.

  • Avoid repeatedly underestimating your time.


Consistency is particularly important when customers refer you to other businesses. They'll sometimes share what they're paying, creating expectations before you've even inspected the new job.


2. Start With What You Need to Earn

Learning how to quote window cleaning jobs consistently starts with understanding what you need to earn and how long the work will take. For example, let's say your target is $100 per hour.


The calculation:

  • Hourly target: $100

  • Minutes per hour: 60

  • Per-minute rate: $100 ÷ 60 = approximately $1.67


This gives you a starting point for calculating the labor component of a job. But there's an important distinction: your target hourly rate is not necessarily your personal take-home pay.


The price you charge must also allow for business expenses such as equipment, consumables, insurance, vehicle costs, administration, taxes and the profit needed to sustain your business.


The $100 figure is an example, not a recommended industry rate. Your actual target should reflect your own costs and financial requirements.


3. Clean a Sample Pane Before Quoting

Here's a technique I've found particularly useful. When practical, clean a single pane of glass as a demonstration before providing your quote.


There are two reasons for doing this. First, it lets the customer see the quality of your work. Rather than just talking about what you offer, you're showing them. Second, it allows you to measure how long the work actually takes. Time yourself completing the normal cleaning process:

  1. Wet and agitate the glass with your applicator.

  2. Remove the water using your squeegee.

  3. Detail the edges with a cloth where required.


Now you've got a real measurement instead of a guess. Choose a pane representative of the job, remembering that other sections may be larger, dirtier or more complicated.

4. Use That Time to Calculate a Starting Price

Let's imagine you've timed a typical pane, and it takes 90 seconds to clean one side.

The customer has 30 similar panes requiring an outside-only clean.


SqueegeeMEclean window cleaner inspecting dirty retail shopfront glass while recording details on a clipboard to prepare a window cleaning quote.
By identifying potential challenges and recording the work involved, he can estimate the time required and calculate a fair, consistent price rather than relying on guesswork.

Example calculation:

  • Time per pane: 90 sec

  • Number of panes: 30

  • Total cleaning time: 30 × 90s = 45m

  • Target hourly rate: $100

  • Est labor: 45m × ($100 ÷ 60m) = $75



Remember, a window may have two sides. If each side takes 90 seconds, cleaning both sides takes three minutes, not 90 seconds. The $75 is your initial estimated cleaning labor, not necessarily the final price you should quote the customer. You still need to account for any additional time, expenses and job-specific requirements not already covered by your calculation or hourly-rate assumptions.


5. Check for Hidden Difficulties

Before finalizing a price, look beyond the number of panes.

Ask yourself:

  • Will I need extra time for difficult access or obstacles?

  • Are some panes unusually large or divided into smaller sections?

  • Is there heavy dirt or contamination requiring additional work?

  • Does the customer expect internal glass, frames or other surfaces cleaned?

  • How much time will travel, setup and packing away require?


These factors can affect how long the job takes and whether your calculated base price is realistic.


If the work requires methods or access outside your skills and equipment, don't assume you can solve the problem by charging more. Some jobs should be declined until you have the appropriate capability.

6. Compare the Quote with Similar Jobs

Before presenting your price, think about jobs you've already completed. Have you cleaned a similar shopfront? Was the layout more complicated? Did it take longer than expected? What did you learn?


Comparing similar jobs helps you identify things you may have overlooked and check whether your price is consistent. As your experience grows, these comparisons become one of your most useful quoting tools.


The Lesson: Measure First, Quote Second

Quoting gets easier when you stop relying on instinct alone. Start with your required earnings, time a representative pane, calculate your estimated cleaning time and account for the conditions of the job. Then compare your estimate with similar work.


You won't get every quote right. I certainly didn't when I started. But every completed job gives you an opportunity to improve your judgement.


Continue to Part 2: Window Cleaning Pricing: Handling Objections, Service Options and Discounts explains what to do after you've calculated your price, including handling customer objections and offering alternatives without automatically discounting your work.



If you're still developing the practical skills needed to assess and complete basic window-cleaning work, explore the SqueegeeSchool hands-on workshop. It provides supervised practice in professional cleaning techniques, not comprehensive business or quoting training.

Comments

Rated 0 out of 5 stars.
No ratings yet

Add a rating
bottom of page